Project

orangepi-build

active

Debian image builder for Orange Pi 6 Plus — Cix P1 SoC patches on top of the official build system.

Overview

Forked from orangepi-xunlong/orangepi-build. Carries patches for the Orange Pi 6 Plus (Cix P1 SoC) Debian image build, on top of the official Orange Pi build system that covers Allwinner, Rockchip, Starfive, and Cix boards.

How it works

The build system runs on Ubuntu 22.04 and cross-compiles a full Debian image for the target board. It handles U-Boot, kernel, device tree, rootfs assembly, and image packaging. The fork adds board-specific patches and configuration for the Orange Pi 6 Plus and its Cix P1 SoC — a newer addition to the Orange Pi lineup that isn't fully upstream yet.

Features
🍊
Orange Pi 6 Plus

Board-specific patches for the Cix P1 SoC — a powerful ARM SoC for SBC workloads.

📦
Full Debian images

Produces ready-to-flash SD card or eMMC images with a working Debian userland.

🔧
Official build system

Based on the well-maintained orangepi-build toolchain — same workflow as all other Orange Pi boards.

🖥
Multi-board support

The upstream build system covers 20+ boards across Allwinner H6/H616/T527, Rockchip RK3399/RK3566/RK3588, Starfive JH7110, and Cix P1.

Architecture
Kernel patches DTS · drivers · defconfig Build system cross-compile toolchain Kernel 6.x aarch64 U-Boot bootloader SD card image bootable Armbian Orange Pi 6 Plus RK3588 · 16 GB flash Orange Pi 6 Plus kernel and U-Boot patches